THC 100 and 50 Hole Screw Capping Machine

The term "electric electronic cigarette cap screwing machine" refers to a device that can quickly, conveniently, and accurately screw various electronic cigarette holders at the same time.

It is primarily made up of mechanical and electrical control devices. The electrical component uses a touch screen display. (The equipment is shipped in its entirety, with no customer installation).

The purpose of this equipment is to screw the cap of various electronic cigarette holders. The mechanical device is made up of two parts: the mechanical device and the electrical control device. The mechanical device consists of the following components: an electric rotating component, a Z-axis lifting component, an X-axis moving component, and a Y-axis moving component. The coordinated operation of each component allows the electronic cigarette holder to be tightened on the atomizer simply, conveniently, and accurately. The device's data is transmitted to the touch screen via torque, positioning, and other sensors. The device can be controlled automatically, and the screw cap parameters can be displayed in real time.

1. Before operation, please carefully check whether the power supply meets the specified voltage, whether the power supply has a grounding wire, whether the power cord is properly connected according to specifications, and whether electrical components have short circuits. careful

2. Inspect each pipeline system for leakage and loose pipeline interfaces; operations can only be performed if everything is normal.

3. Before operating the device, demonstrate the steps of operation.

4. Do not open the safety door to operate the equipment to avoid accidents.

5. In order to immediately cut off the power supply in an emergency, the incoming line end of the equipment power supply should be connected to an air switch with leakage protection. To avoid electric shock, the housing must be properly grounded.

If it is necessary to move the machine, make sure to turn it off before doing so.

1. Please keep the inside and outside of the machine clean and free of stains after each use.

2. This is high-precision equipment. When handling, use the recommended methods and avoid colliding.

3. The equipment's power-on and power-off intervals must be at least one minute.

4. If the equipment is not used for an extended period of time, it should be turned on every other month.

5. Do not remove electrical components or equipment components arbitrarily to avoid damaging the equipment or affecting its performance.

6. The operation of this equipment necessitates the use of professional or trained personnel for maintenance and repair.

Hot Tags: THC 100 and 50 hole screw capping machine, China THC 100 and 50 hole screw capping machine manufactures, suppliers, factory, THC Closing Machine, THC Single Hole Screw Capping Machine, THC 100 And 50 Hole Screw Capping Machine