What Are The Main Types Of Electronic Cigarette Detection Equipment?

【1】E-cigarette gas leakage detection instrument
Electronic cigarette leak detection equipment is one of the electronic cigarette testing machine series, which is mainly used to test the electronic cigarette vaporizer, electronic cigarette battery (can be tested by air suction or button connection) or the life of the finished electronic cigarette.
【2】E-cigarette life tester
Test the airflow through the electronic cigarette, the life of the button, etc.
【3】Electronic cigarette draw resistance tester
The electronic cigarette draw resistance test is mainly used to measure the draw resistance performance of electronic cigarettes, and is suitable for electronic cigarette production quality control and electronic cigarette inspection. When simulating human smoking action on the electronic cigarette and inhaling air with a fixed flow rate of 17.5ml/s, a certain vacuum pressure will be generated at the suction end of the electronic cigarette at this time. This pressure is the resistance of inhalation, referred to as suction resistance, measured At this pressure, the resistance to draw can be measured.
【4】Electrical cigarette air tightness testing machine
The electronic cigarette air tightness testing machine is mainly used to test the air tightness device of electronic cigarette components.
【5】Controllable air blower for electronic cigarette
The controllable air blower for electronic cigarettes is used for testing the airflow sensing device of electronic cigarette battery rods. That is to say, after welding the squint and related electronic components, use the machine to do the blowing test. If the soldering is correct, the squint senses and the corresponding indicator light is on. Each time the switch is pressed, the air nozzle will automatically shut down after a certain time delay.
【6】Electronic cigarette mouth counting machine
The electronic cigarette mouth counting machine is one of the electronic cigarette testing machine series, which is mainly used to test the battery life of electronic cigarettes or electronic cigarettes. The principle is to adjust a certain inhalation volume or inhalation pressure, the suction nozzle sucks and stops the sample, and repeats the cycle until the e-cigarette or the e-cigarette battery is exhausted or the number of times the e-cigarette battery drops to a certain voltage is used to judge the e-cigarette. The service life of cigarette or e-cigarette battery, and improve it.
【7】Electronic cigarette draw resistance tester
The electronic cigarette draw resistance test is mainly used to measure the draw resistance performance of electronic cigarettes, and is suitable for electronic cigarette production quality control and electronic cigarette inspection. When imitating the human smoking action on the electronic cigarette and inhaling a fixed flow of air, a certain vacuum pressure will be generated at the suction end of the electronic cigarette at this time. suction resistance.
【8】E-cigarette box cover shaft testing machine
The electronic cigarette box cover shaft tester is mainly to detect the number or time of repeated opening/closing to complete breakage and after a certain number of times or a certain period of time, to check whether the shaft is damaged. The electronic cigarette box cover flip fatigue tester can simulate electronic cigarettes The cigarette case lid is opened and closed repeatedly at a certain speed and angle.
【9】Electronic cigarette high-altitude low-pressure testing machine
This kind of test is mainly used in the battery test. The ultimate purpose of the test is to see if the battery does not explode or catch fire, smoke, or leak, and the battery protection valve cannot be damaged.