Precautions For Use Of Computer-adjusted Filling Machine

1) Precautions:
1. Do not use excessive force when clicking on the touch screen filling machine, which will cause damage to the touch screen.
2. When clicking on the touch screen, keep your fingers dry and avoid touching them with wet fingers.
3. When the machine head is lowered for welding, never touch the upper plate with your hands, otherwise it will cause high-frequency burns and electric shocks.
4. When debugging and installing the mold, the high cycle switch should be turned off.
5. When the liquid filling machine is being debugged and operated, it can only be operated by a single person, otherwise it is very dangerous.
6. If the machine is abnormal during misoperation, please tap the "emergency stop switch" quickly to confirm the safety of the man-machine.
7. Do not put your hand into the cutter part, it is very dangerous.
2) Common sense of maintenance:
1. Inject lubricating oil into the bearing, guide rod, ball screw, cutter, servo screw, cutter slide rail, etc. every two to three months to keep the machine running smoothly.
2. When not in use for a long time, warm up the machine every once in a while.
3. Clean up the dust and sundries on the countertop, polar plate and machine platform, and high-cycle barrels, and clean them up.
4. Frequently clean the servo rollers and clean the surface.