Pay Attention To The Maintenance And Installation Of Edible Oil Filling Machine

The importance of edible oil filling machine for food safety, with a good edible oil filling machine, today we will briefly talk about the key points of maintenance of edible oil filling machine.
1. Check the moisture filter and oil mist device of the pneumatic combination two-piece before starting every day. If the filling machine has too much water, it should be removed in time. Inject lubricating oil once, and the specific operation depends on the situation.
2. Check whether the grounding wire of the equipment is firmly in contact, check whether there is any air leakage in the pneumatic pipeline, whether the air pressure is stable, whether the motor chain is tight or not, and whether the cbd filling machine is suitable.
3. Always observe the mechanical parts to see if they are running normally, whether there is any abnormality in the lifting and rotation, and check the machine screws frequently. Generally, the screws are tightened and reinforced every week.
4. The motor needs to replace the lubricating oil regularly.
5. After the daily shutdown, the e-liquid filling machine should clean up the residual materials in time, do a good job in cleaning and sanitation, keep the surface of the machine clean, and keep the electric control cabinet clean. When cleaning, the motor and circuit parts need to be kept dry. Use a rag Wipe clean.
6. The sensor is a high-precision, high-seal, and high-sensitivity device. It is strictly forbidden to hit the perfume filling machine and overload it. It must not be touched during work, and it is not allowed to disassemble unless it is necessary for maintenance.
7. It is strictly forbidden to move or collide with the filling machine when it is running. Be careful not to collide with the original parts of the machine when it needs to be moved. Long-distance transportation and handling must be packed well to prevent some components from being damaged by impact.
8. When the essential oil filling machine is out of use for a long time, the material in the pipeline should be emptied. When it is out of use for a long time, it is best to clean the outside and inside of the machine and put it in a box for storage.
After buying the machine and unpacking it, we first check whether the random technical information is complete and whether the machine is damaged during transportation, so as to solve the high-precision filling machine in time.
Next, install and adjust the feeding and discharging components according to the outline diagrams in this manual.
Then add new lubricating oil to each lubricating point.
Then turn the machine with the rocker handle to check whether the machine is running in the correct direction (counterclockwise when facing the motor shaft). For small metering filling machines, the machine must be protected and grounded.
In addition, we also need to understand the working principle. The DY series filling machine is a fully automatic filling machine. A piston is driven by the cylinder to extract and discharge the material. The flow direction of the material is controlled by a check valve, and the stroke of the cylinder is controlled by a magnetic reed switch, that is, The filling volume of the small-dose filling machine can be adjusted.