A newly developed 10-needle electric cigarette oil injector is gaining attention for its ability to quickly, conveniently, and accurately inject oil into multiple specifications of cigarette products simultaneously.
Operational Principles and Structure
The injector consists of mechanical and electrical control devices. The electrical part features a touch screen display. Mechanically, it includes an electric oil injection component, a Z-axis moving component, and a Y-axis moving component. These parts work in coordination to enable simple, convenient, and precise oil injection. Sensors for temperature and positioning transmit equipment data to the touch screen, allowing for automatic control and real-time display of all oil injection parameters.
Performance Parameters
Input Voltage: Single-phase AC 110VAC 60Hz
Input Power Capacity: 2.0kW
Temperature Measurement Range: 0 - 120℃ with an accuracy of 2%
Equipment Dimensions: 750x500x800
Equipment Weight: 75kg
Environmental Conditions: Temperature 0 - 120℃
Liquid Volume Accuracy (Rated Stroke): Error ≤ 1%
Liquid Volume Accuracy (Repeatability): Error 0.3% - 0.7%
Maximum Capacity of Oil Storage Basin: 2000ml
Rated Driving Force of Piston: 0.9N.m
Injection Volume Specification: 0.1 - 3mL
Liquid-Contact Materials: Aluminum Alloy, Silicone, Stainless Steel
Installation and Safety
For installation, the device should be placed in a location with a temperature of 15 - 100℃, relative humidity not exceeding 85%, no drastic temperature changes, level ground, no direct sunlight, good ventilation, and little dust. When moving, use a lift to keep it horizontal and remove the packaging crate first.
Safety precautions cover both mechanical and electrical aspects. Mechanically, operators must refer to the manual, wear appropriate clothing, avoid touching heated parts, plan operations, and stop moving parts before demonstrations. Electrically, disconnect the main power during maintenance, which should only be done by qualified personnel, and turn off power before working in the electrical box.
Operational Notes
Before operation, check the power supply, grounding, wiring, electrical components, and pipelines. Demonstrate steps first, don't operate with the safety door open, use a leakage-protected air switch, ground the housing, and disconnect power before moving.
Fault Handling
Common faults include touch screen display issues (due to loose power terminals or faulty switches/screens, fixed by reconnecting or replacing), origin reset failures (check sensors/motors), automatic mode problems (reset axes), oil injection issues (adjust speed/time), oil overflow (adjust speed or replace seals), and temperature display errors (check sensors).
This injector represents a step forward in cigarette production equipment, combining efficiency, precision, and safety.
