Main Structure and Working Principle
This desktop capping machine is mainly composed of a frame, a pressing fixture and a hydraulic station device. It is delivered in a fully assembled form, eliminating the need for customers to install it themselves, which greatly saves installation time and costs. Its working principle is to achieve the precise pressing of the mouthpiece of the e - cigarette atomizer through the coordinated operation of the frame, the pressing fixture and the hydraulic station device. The mechanical devices of the equipment include a frame component and a pressing component. All components operate in coordination to ensure that the e - cigarette atomizer can be pressed tightly with the mouthpiece simply, conveniently and accurately.
Main Performance Parameters
The model of this desktop capping machine is DHC5E, with excellent performance. Its input voltage is AC110VAC 60Hz, and the input power capacity (power) is 800W. It can adapt to atomizers with a length range of 20 - 85mm. The equipment size is 650x500x1320mm, and the weight is 175kg. It can work stably in an environment with a temperature of 10 - 40℃. The working pressure is as high as 4500Kg, and it adopts a hydraulic control method to ensure the stability and accuracy of the capping process.
Installation and Safety Precautions
In terms of installation, in order to stably exert the performance of the equipment, a place with a temperature of 15 - 40℃ and a relative humidity of not more than 85% should be selected, and the ambient temperature of the installation place should never change sharply. The equipment needs to be installed on a horizontal ground, in a place with no direct sunlight, good ventilation and less dust. When moving and unloading the equipment, it is necessary to handle the wooden box of the packaged equipment gently and keep the equipment horizontal. After the equipment enters the production workshop, stand up the wooden box according to the instructions and then unpack and unload the equipment. At the same time, check whether there is any damage on the surface of the equipment.
Safety precautions are of vital importance. In terms of machinery, when operating the equipment, it is necessary to refer to the operation manual, wear appropriate work clothes, avoid wearing ties, necklaces or loose clothes, and wear necessary protective devices. Do not touch the moving parts of the equipment with hands. Consider the operation steps before operation, and stop all moving parts before demonstrating any operation beside the equipment. In terms of electricity, there are electrical hazards at the power supply and terminal of the equipment. In order to avoid any electric shock and injury accidents, the main power supply must be cut off when maintaining and repairing the equipment, and only qualified or trained maintenance personnel are allowed to maintain and repair the equipment. Turn off the main power supply before doing any maintenance in the electrical box, and live - working is strictly prohibited. Only trained personnel are allowed to maintain or adjust live. At the same time, understand and remember the location of all safety devices and strictly abide by standard safety rules.
Key Points for Operation
Before operation, carefully check whether the power supply meets the specified voltage, whether there is a grounding wire for the power supply, whether the power cord is properly connected according to the specifications, and whether there is any short - circuit in the electrical components. At the same time, carefully check whether there is any leakage in the pipeline system and whether there is any looseness at the pipeline interfaces. Only when everything is normal can the operation be carried out. Before operating the equipment, the operation steps should be demonstrated first. If it is necessary to move the machine, be sure to cut off the power supply before operating.
With its high - efficiency and accuracy characteristics, this new desktop capping machine provides a reliable production equipment for e - cigarette manufacturers, and is expected to further promote the improvement of production efficiency in the e - cigarette industry.
