How To Maintain The Filling Machine in Hot Summer?

Summer is a season of high temperature and rain. High temperature is a challenge for all kinds of machinery, and the same is true for liquid filling machines. Many parts of the filling machine are made of stainless steel, but there are still many structures made of steel, so in this hot and rainy season, the filling machine is prone to failure. Then use special oil to scrub the parts of the machine that do not touch the material. The cylinder of the filling machine has been lubricated before leaving the factory, so try not to disassemble the cylinder or add any lubricating oil yourself, and be careful to cause damage to the cylinder. Pay attention to the sealing ring of the filling machine, and replace it in time if it is worn out. The material tank of the filling machine, the stainless steel three-way and the three-way steering valve are generally detachable, and can be removed and cleaned during cleaning. After dismantling and washing, install it according to the original position, and then test run it to see if there is any abnormal reaction. If everything is normal, you can start to continue production.
Before dismantling and washing the liquid filling machine, please be sure to turn off the air source and power, and then disassemble and wash. The stainless steel of the wine filling machine is just an ordinary steel with an extra layer of alloy on the surface. Under normal circumstances, there will be no problems on the surface of the stainless steel, but when encountering sharp objects, the stainless steel has scratches, and it is easy to scratch Rust stains appear everywhere, which will bring quality pollution to the products produced. If stains appear on the surface, wipe with special oil.