The main function of the filling machine is to fill and package beverages

The main function of the filling machine is to fill and package beverages. Different types of equipment will be used for different beverage filling. Everyone must do a good job of inspection before disassembling and assembling the equipment. Let's talk about what to check when checking the filling machine out of the box.
After the filling machine is unpacked, the main body, parts and accessories that cannot be installed immediately should pay attention to the storage location and common problems. According to structural characteristics, raw material characteristics, part characteristics, surface smoothness, etc. The storage time and meteorological conditions should also be considered, and the storage place should be free of dust, sludge and corrosive steam. When mildew occurs, wipe the protective oil again. When placing the equipment, use wood or other gaskets to firmly ensure the height above the ground to prevent corrosion, deformation and moisture return of the human body. For fragile and fragile items, try to use the original box throughout the storage process.
Choose a vantage point to unpack. Try to choose a location close to the installation site and check the surrounding environment to avoid damage to equipment and staff in the nearby liquid pipe field when the compartment explodes. Nail pullers and crowbars are commonly used when unpacking. For parts, it is forbidden to hit the carriage with a sledgehammer, so as not to damage the precision of the human body and parts. For the protective packaging and protective items of the filling machine, except for the inspection and key parts, the packaging and protective chemicals should not be cleaned prematurely. When the equipment must run and slide on a small scale, it is necessary to clean the packaging, clean and protect the grease, and paint the grease according to the technical standards, and then turn or slide for inspection.