The specific operation method of the capping machine

1. After pressing the easy-open cover or aluminum cover, put it into the rolling head, press the handle up and down lightly until the rolling head is tightened, then release the handle (without excessive force) to restore the original position. Use three fingers to check that the cap is not loose.
2. If the capping is not tight or smooth for the first time, you can adjust the rolling head, turn it clockwise to loosen it, and turn it counterclockwise to tighten it.
Specific operation method:
Hand-held capping machine, hold the machine in the left hand and hold the bottle in the right hand, put the cap into the capping machine, and the operation can be completed with a light grip of the right hand. The desktop capping machine has a platen, and the bottle can be placed on the table, and the handle can be slightly pressed down by hand to complete.
Adjustment:
Each model of the manual capping machine has only one capping head, the heads can be exchanged between models 8 to 20, and the heads can be exchanged between models 24 and 32. It can be used to press bottles of different specifications by replacing them with different capping heads, which is easy to operate.