Operation method of liquid quantitative filling machine

Mechanized production has improved the production efficiency of our enterprise. While increasing the production scale of the enterprise, we cannot ignore the importance of safe operation in the production process. Many news reports of factory explosions, fires, casualties and other incidents have made us reflect , the importance of safe operation.
Operation method:
1) Check before using the filling machine: After the machine is installed, turn on the power, test run the three-phase motor to ensure the correct direction of operation, ensure the pressure and flow of compressed air, check whether the motors, bearings, etc. need to be lubricated, It is strictly forbidden to run without oil, and the machine can only be started after it is normal. At the same time, observe whether the fasteners of each part are loose. After the operation of each part is stable, it can be used normally.
2) Check whether the safety facilities are functioning normally.
3) Before starting the machine, carefully check whether there is water in all the water tanks, whether the chain plate is stuck, whether there are sundries on the conveyor belt, whether there are bottle caps in the lid box, whether there are several buckets of water source, power supply, and air source. After you press ready, turn on the main power supply, the power indicator light of the vape oil filling machine is on, the fault indicator light, and the emergency stop indicator light are off, then the starting conditions are met, press the start button on the control box and the start switch at the filling place , after three warning beeps, the whole machine starts to run, and enters the automatic working mode of washing, rinsing, and filling. To stop, you can press the stop button at the filling place and the control box to stop and turn off the main electric perfume filling machine. source.
Regular inspection and maintenance: The starting components such as the cylinder, solenoid valve, speed control and electrical parts should be inspected every month. The inspection method can be manually adjusted to check whether it is good or bad and the reliability of the action. The cylinder mainly checks whether it is leaking or stuck. Phenomenon, the solenoid valve can be forced to operate manually to check whether the electromagnetic coil of the IP safety section is burned or the valve essential oil filling machine is blocked. Whether the output element is working properly.