CBD Pneumatic 100 Needles Filling Machine
Drive mode: pneumatic
Production speed: 200~300pcs/min
Advantages: Product type data storage function, temperature control system, touch screen operation.
Dihai Filling Machine Oil Filling Machine Thick Oil Cartridge Filling Machine 100pcs/time (CBD Pneumatic 100 Needle Filling Machine)
Model: DHF8P
Drive mode: pneumatic
Production speed: 200~300pcs/min
Advantages: Product type data storage function, temperature control system, touch screen operation.
Fully automatic infusion machine, 100 pcs per infusion
Introducing the Automated Cartridge & Disposable filling machine. Machine arrives “Ready-to-Run”, it is pre-assembled and pre-tested from our factory. It will fill the newest of cartridges including stainless steel/glass or the ceramic /plastic variety.
Details
The machine can fill many different typer of disposables to the thickest of oils. The Dual Heat Injection system makes it easy to load the liquids into the device. Up to 300 cartridge or disposable Fills per minute. Fill range 0.1ml-3ml








Specification
|
Name |
Parameters |
|
Operating Voltage |
AC110VAC 60Hz |
|
Rated Power |
1.5kW |
|
Temperature range |
0~100℃ ±1% |
|
Product Dimensions (MM) |
710x510x1550 |
|
Item Weight |
120kg |
|
Operating Air pressure |
0.5~0.8MPa |
|
Drive |
Pneumatic |
|
Length range of Cartridge |
0~120mm |
100 pieces/time filling machine
Attachment List
Tool kit
4 pallets (2 types allowed)
Fuse and 100 replacement pins, 2 silicon pads
Warranty: 2 years warranty for the machine and its parts

Installation Site Requirements
1. In order to stably exert the performance of the equipment, the temperature should be 15~120 ℃, and the relative humidity should not be greater than 85%;
2. Remember that the ambient temperature at the installation site changes sharply;
3. It should be installed on a horizontal ground, without direct sunlight, with good ventilation, and in a place with little dust.
Mobile Loading and Unloading of Equipment
1. Please use a lift to lift the wooden box of packaging equipment and keep the equipment level when entering the production workshop.
2. After the equipment enters the production workshop, the wooden box is packaged and erected according to the instructions on the wooden box, and then the equipment is unpacked and unloaded.
3. Check whether the equipment surface is damaged by bumps and other damages.
Hot Tags: CBD pneumatic 100 needles filling machine, China CBD pneumatic 100 needles filling machine manufactures, suppliers, factory, CBD 100 Needles Multifunctional Electric Filling Machine, CBD 5 Needles Filling Machine, CBD Four Station Pneumatic Filling Machine, CBD Pneumatic 100 Needles Filling Machine, CBD 10 Needle Electric Filling Machine, 4 Flavor CBD Oil Pan
You Might Also Like
Send Inquiry


















